Semco Evolution Lathes
The EVOLUTION machines can be used as a manual lathe by
using the electronic handwheels, the control is used as a simple
DRO measuring system. For one-offs and small batch production
the EVOLUTION can be programmed, using the flexible electronic turning
cycles, its quick, its convenient and you do not have to be CNC
trained to use the electronic cycles. You can produce tapers, radii,
grooving, multi point profiles and screwcutting by answering simple
questions direct from the Fanuc screen. These electronic cycles
can then be linked together to give a complete electronic programme.
For complicated shapes and batch production, full ISO programming
on the Fanuc Oi Turn Mate control is possible.
EV 200
EV 200
|
Features include:
- Fanuc Touch screen control Solid cast construction
- High power stock removal
- Auto indexing 4 way toolpost
- Twin handwheels
- Hardened & ground solid ways
Options:
- 3 & 4 Jaw chucks, Steadies
- Auto Indexing 8 station turret
|
|
The EVOLUTION machines include fully enclosed guarding, meeting
CE regulations, automatic 4 way indexing toolpost, automatic speed
range change and new Fanuc touch screen control and monitor on sliding
pendant.
Machine programmes can be up and downloaded through the RS232 port
or saved directly to the PMCIA card.
Specifications
| Model |
EV165 |
EV180 |
EV200 |
EV225 |
EV260 |
EV310 |
EV310/155 |
EV325 |
| Centre height (mm) |
165 |
180 |
200 |
225 |
260 |
310 |
310 |
325 |
| Swing over bed (mm) |
335 |
360 |
400 |
450 |
530 |
620 |
620 |
660 |
Swing over cross slide
(mm) |
168 |
198 |
210 |
260 |
315 |
415 |
415 |
368 |
Distance between
centres (mm) |
750 / 1000 |
750 / 1000 |
1000 / 1500 |
1000 / 1500 |
1 / 1.5 / 2 / 3 M |
1 / 1.5 /2 / 3 M |
1 / 1.5 / 2 / 3 M |
2 / 3 / 4 / 5 M |
| Bed width (mm) |
250 |
250 |
300 |
300 |
350 |
350 |
350 |
452 |
| Main spindle bore (mm) |
42 |
42 |
65 |
65 |
80 |
80 |
155 |
105 |
| Spindle nose |
D1-5 |
D1-5 |
D1-6 |
D1-6 |
D1-8 |
D1-8 |
ASA B5,9 |
D1-8 |
| Spindle taper |
4 |
4 |
5 |
5 |
5 |
5 |
5 |
5 |
| Number of ranges |
1 |
1 |
2 |
2 |
2 |
2 |
3 |
2 |
Variable speed RPM
with CSS |
10 - 4,000 |
10 - 4,000 |
0 - 3,000 |
0 - 3,000 |
0 - 2,500 |
0 - 2,500 |
0-780 |
0-2,000 |
Working feed rates
(mm/min) |
|
|
|
|
|
|
|
|
| Rapid feeds M/min |
|
|
|
|
|
|
|
|
| Tailstock diameter |
58 |
58 |
68 |
68 |
82 |
82 |
82 |
96 |
| Tailstock quill travel |
200 |
200 |
220 |
220 |
235 |
235 |
235 |
215 |
| Tailstock quill taper |
3 |
3 |
4 |
4 |
5 |
5 |
5 |
6 |
| Main motor power in kW |
5.5 kW |
5.5 kW |
7.5 kW |
7.5 kW |
11 kW |
11 kW |
11 kW |
11 kW |
| Pump motor power in kW |
0.57 |
0.57 |
0.57 |
0.57 |
0.57 |
0.57 |
0.57 |
0.57 |
| X axis motor force (N) |
3393 |
3393 |
3393 |
3393 |
3393 |
3393 |
3393 |
3393 |
| Z axis motor force (N) |
4460 |
4460 |
6786 |
6786 |
8934 |
8934 |
8934 |
10100 |
| Width of machine |
1350 |
1350 |
1450 |
1450 |
1720 |
1720 |
1720 |
8000 |
Length of Lathe +
Between centres |
1350 |
1350 |
1560 |
1560 |
1600 |
1600 |
1600 |
2325 |
| Weight of Machine kg |
1545/1630 |
1595/1680 |
2180/2290 |
2380/2650 |
2875 - 3500 |
3180 - 3750 |
3275 - 3800 |
4700- |
Turning has Evolved
Centre lathe turning has progressed at an impressive rate
since the conception of electronics, driving axis and spindles,
and computer driven programming.
The EVOLUTION range of machines, combines all the virtues
of conventional turning, electronic cycle turning and full
CNC turning all in ONE machine.
The EVOLUTION machines can be used as a manual lathe
by using the electronic handwheels and axis joy stick, the
control is used as a simple DRO measuring system. For the
1 offs and small batch production the EVOLUTION can be programmed,
using the flexible electronic turning cycles, its quick, its
convenient and you do not have to be CNC trained to use the
electronic cycles. You can produce tapers, radii, grooving,
multi point profiles and screwcutting by answering simple
questions direct from the Fanuc screen. These electronic cycles
can then be linked together to give a complete electronic
programme.
For complicated shapes and batch production, full ISO programming
on the Fanuc Oi Turn Mate control is possible.
The EVOLUTION machines include fully enclosed guarding,
meeting CE regulations, automatic 4 way indexing toolpost,
automatic speed range change and new Fanuc touch screen control
and monitor on sliding pendant.
Machine programmes can be up and downloaded through the RS232
port or saved directly to the PMCIA card.
The range starts at 165mm centre height to 325mm centre height,
with bed lengths varying from 750mm to 5000mm, spindle speeds
vary for sizes of machines but all have CSS fitted as standard.
Axis and spindle drives are all Fanuc to give reliability
and longevity of service.
Details
Standard Features
- Touch screen Fanuc Turn Mate control
- Interlocked guarding & chip collection system
- Coolant equipment
- Automatic lubrication of bed ways
- Electronic hand-wheels or X & Z Axes
- Feed override control
- Digital Fanuc AC spindle Motor
- Digital Fanuc AC Feed drives & motors
- High power lighting
- Fixed centres & reducing bush
- 4 way auto indexing toolpost
- Instruction Manual
- Hardened bed to 400-450 HB
|
Options:
- 3 & 4 Jaw chucks
- Fixed & travelling steadies
- Live centres
- Face plates
- 8 Station turret
|
Tool post
Chuck
|
Top of page