Product Range
|
|
|
|
Drilling Machines Bench / Pedestal Drilling Machines
Specifications
| Capacity |
AJBM.13A |
AJBM.20A/AJPM.20A |
AJPM.32A |
| Drilling Capacity |
13mm |
20mm |
32mm |
| Spindle Stroke |
50mm |
85mm |
120mm |
| Spindle Taper |
J6 |
2MT |
4MT |
| Distance from Column to Spindle |
103mm |
180mm |
255mm |
| Distance from Base to Spindle |
419mm |
625mm / 1219mm |
1210mm |
| Distance from Spindle to Table |
190mm |
470mm |
760mm |
Table |
|
|
|
| Table Size |
162mm x 162mm |
305mm x 305mm |
430mm x 430mm |
| Tilt of Table |
45 Deg |
45 Deg |
45 Deg |
| Rotation of Table |
360 Deg |
360 Deg |
360 Deg |
Motors & Voltages |
|
|
| Motor Power |
0.3 HP |
750W |
1100W |
| Voltages |
240 Volt Single Phase |
240 Volt Single Phase & 415 Volt 3 Phase |
415 Volt 3 Phase |
Base Column |
|
|
|
| Base Size |
290mm x 186mm |
460mm x 280mm |
580mm x 430mm |
| Column Diameter |
60mm |
72mm |
85mm |
Speeds |
|
|
|
| No of Speeds |
5 off |
12 off |
12 off |
| Range of Speeds RPM |
510 - 2580 |
280 - 2380 |
150 - 2450 |
Weight and Dimensions |
|
|
| Height |
580mm |
990mm / 1618mm |
1720mm |
| Net Weight |
20 kg |
66 kg / 96 kg |
137 kg |
Details
BM.13A
This well engineered drilling machine is available only
in single phase and has a 0.3 HP motor to generate five
speeds from 510-2580 rpm.
A square table which can be rotated through 360 degrees
and tilts 45 degrees either side is ideal for light
drilling applications.
The machine incorporates as standard and rack and pinion
for ease of positioning of the table , 'dial-in' depth
stop and a quality ½" capacity 3 jaw chuck.
BM.20A/PM.20A
This range of bench and pedestal drilling machines are
designed for drilling up to 5/8"(16mm) diameter
and are available in single or 3-phase. Both models
incorporatea pozitive depth stop and a rack and pinion
incorporated to assist the operator in positioning of
the table which has a rotation of 360 degrees and will
tilt +/- 45 degrees. The spindle is a No.2 Morse Taper
and both models are supplied with a 5/8" capacity,
quality 3 jaw chuck and key as standard.
PM.32A
To compliment the range of belt driven drilling machines,
the PM.25 is ideally suited for drilling up to 1"(25mm)
diameter an is available with 3 phase electrics. This
model incorporates the same features as the AJPM.16
but with an increased table size of 430mm x 430mm and
a column diameter of 92mm. The spindle is No.3 Morse
Taper and is supplied as standard with a 5/8" capacity,
quality chuck and key.
Now with a machine vise fitted to the reverse of the table as standard. |
|
 Top of page |
|
|
