Ajax Apollo Production Lathes
Model AJPD 165 AJPD180 AJPD200 AJPD225 AJPD260 AJPD310 AJPD310/155 AJPD325 AJPD375 AJPD500
Centre height in mm 165 180 200 225 260 310 310 325 375 500
Swing over bed in mm 335 360 400 450 530 620 620 660 760 1010
Swing over cross slide in mm 168 198 210 260 315 415 415 368 468 718
Distance between centres in mm 750/1000 750/1000 1000/1500 1000/1500 1/1.5/2/3 M 1/1.5/2/3 M 1/1.5/2/3 M 1/1.5/2/3 M 1/1.5/2/3 M 2/3/4/5 M
Bed width in mm 250 250 300 300 350 350 350 425 425 500
Main spindle bore in mm 42 42 65 65 80 opt 105 80 opt 105 155 105 105 130
Spindle nose D1-5 D1-5 D1-6 D1-6 D1-8 D1-8 ASA B5,9 D1-8 D1-8 D1-11
Spindle taper 4 4 5 5 5 5 5 5 5 80
Number of speed ranges 1 1 2 2 2 2 3 2 3 3
Variable speed RPM 0-4000 0-4000 0-3000 0-3000 0-2500 0-2500 0-780 0-2000 0-1800 0-1500
Working feed rates mm/min 0-10,000 0-10,000 0-10,000 0-10,000 0-10,000 0-10,000 0-10,000 0-7,000 0-7,000 0-7,000
Rapid feeds M/min 15 15 15 15 15 15 15 15 15 15
Tailstock diameter 58 58 68 68 82 82 82 96 96 120
Tailstock quill travel 140 140 155 155 180 180 180 215 215 300
Tailstock quill taper 3 3 4 4 5 5 5 6 6 80
Main motor power in Kw 5.5 5.5 7.5 7.5 11 11 7.5 11 opt 15 15 22
Pump motor power in Kw 0.57 0.57 0.57 0.57 0.57 0.57 0.57 0.57 0.57 0.57
X axis motor force (N) 4500 4500 7910 7910 9040 9040 9040 9040 20357 20357
Z axis motor force (N) 3500 3500 4500 4500 6200 6200 4520 9040 13119 13119

The new range of Apollo Production lathes are designed to meet the new demands of industry. Featuring top FANUC 21i control, the Apollo can be programmed to produce any complicated component, it has a built in profile editor which, in very simple steps can produce any shape.

With the optional production package, which includes a powered 3-jaw chuck, automatic 8-station turret and hydraulic tailstock, the Apollo is a very cost-effective way to produce your components.

Also featuring a solid cast bed and base the Apollo is a powerfully stable machine, which can take large cuts and perform well with any material.

The Ajax Apollo Production range is a very cost-effective way to produce quality, accurate components quickly and easily.

Standard Features

Fanuc 21I CNC control
Dynamic solid and trajectory graphics
Profile editor
Colour screen
Fully enclosed guarding & chip collection system
Coolant equipment
Automatic lubrication of bed ways
Electronic hand-wheels or X & Z Axes
Variable speed to include Constant surfacing speed
AC Spindle Drive
Fanuc Digital Feed drives & motors
Feed override control
Low Voltage lighting
Fixed centres & reducing bush
Quick change tool post with 4 holders
Hardened bed to 400-450 HB
Instruction Manual

Options

Production package to include powered 3-jaw chuck, automatic 8-station turret and hydraulic tailstock
Automatic 8-station turret
Powered 3-jaw chuck
3 & 4 Jaw chucks
Fixed & travelling steadies
Live centres
Face plates
8 Position 4 face indexing quick change tool post